Workover Rig

The rig is a brand new self propelled rig and capable of workover / testing / completion / service upto 10,000′ using 2 7/8″ drill pipe and and 10,000′ using 3 1/2″ drill pipe. The rig is having the hook load capacity of 135 ton and manufactured as per latest API standards applicable in the oilfield Industry.

Four leg leaning type, Hydraulically telescoping, two section, foldable, Mast with clear height of 112 ft from ground level and rated static hook load capacity 135 T with 8 lines strung on traveling block.
The mast is designed as per the latest API 4E/4F standard code and practice.
The Mast can is equipped with a suitable Finger Board which can accommodate 10,500' of range-II, 2 7/8" tubulars in doubles.

Triplex slush pump rated at 500 HP, unitized to a reputed make diesel engine having sufficient capacity, through belt drive compound with shaft or chain drive is acceptable and 5 speed heavy duty gear box with Centrifugal supercharging pump, having pulsation dampener, safety relief valve, pressure gauge etc.

Mounted on a steel oil field skid, 20 gallon, heavy duty 6000 psi mud gauge, Pumps dressed with 3 1/2″ to 6″ liners as per operational requirement.

The pump is capable of handling work over operation in 5 1/2″casing with 2 7/8″
tubular upto a depth of 13,000′. with mud of specific gravity- 2.3.

MUD PUMP

Capacity of Pump

CHOKE AND KILL MANIFOLD

Choke & Kill manifold is as per API of size minimum 2-1/16″ having minimum 5000 psi WP along with sufficient quantity of flexible steel piping of minimum 5000 psi WP of suitable size fitted with NRV in kill lines. It has a suitable combination of valves having provision to flow the well through fixed choke, variable choke and one bypass also. There is also a provision to kill the well through kill line as well as one additional line for making connection through cementing.